Product Dose
- 7934084 reads
For General cleaning it Should be diluted ,at the rate of 1-parts RXSOL-16-1007-025 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt / contamination . For Heavy deposition , immerse the stainless Steel DISCS in the container with concentrated RXSOL-16-1007-025 for 15 minutes to 3 Hrs. At 50 to 60°C ( Heating is not necessary ) .
After the unit or parts have been satisfactorily cleaned, remove the discs by using RUBBER GLOVES and rinse thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc,Tin, Galvanized surfaces or Anodized Aluminium. Then separator discs can be used immediately.
NOTE:-
Recirculation and heating will improves the cleaning action.
For Heavy Duty Cleaning
Separator Cleaner can only be used for cleaning stainless steel separator discs. Fill a stainless steel or plastic container with pure Separator Cleaner. Immerse the stainless steel discs in the container and let the product act for 30 minutes up to a maximum of 2 hours. Heating the product is not necessary. Do not put the discs closely packed into the liquid but take care that there is enough space between them so that the product can work properly. Remove the discs from the bath (wear rubber gloves) and rinse with a powerful water jet. The cleaned separator discs can be used immediately.
A very fast & effectively removes without the need of Scrubbing and Brushing of Centrifugal Separators, Disc & all types of heavy tenacious deposits which collect in fuel & lube oils centrifugal separators disc stacks.
•Chemically brighten Metal surface including aluminium by removal of heavy tenacious deposits from steel or ferrous metal parts
• Save down time by cleaning all types of separator discs without dismantling disc stacks system
• Also can be use as pickling iron and steel surfaces after a welding repair
• Leaves no film or residue after cleaning
• Improves efficiency of centrifuge installation
Other Valuable Cleaner :
RXSOL-16-1007-025 - Disc Cleaner is designed for cleaning of lube oil and fuel oil separators. Keeping the separator disc stack clean means maintaining the separation efficiency and thereby secure clean oil to the engine. Helpful product to reduce workload of personnel.
Biosol Degreaser – Biosol Degreaser is a concentrated liquid cleaning agent designed for the manual removal of oil, grease, wax or other contaminants from the exterior surfaces of machinery, floors, tank tops or other components. It may also be used to clean the interior surfaces of heat exchangers and piping systems in processes where oil, grease or wax is present.
Descalant - Descalant is a concentrated liquid cleaning agent designed for the removal of scale, magnetite, algae, humus, shellfish including mussels, lime, rust and other deposits in water systems such as pipes, heat exchangers, centrifugal pumps, and operating water systems for separators.
Metal Bright
An acidic cleaning liquid with a phosphoric acid base specifically designed for the removal of metallic oxides, rust, calcium carbonate and other inorganic scale.
A strong alkaline cleaning liquid specifically designed for the neutralization of used Metal Bright prior to disposal.
A strong alkaline cleaning liquid with a caustic soda base specifically designed for the removal of biological matter, fat, oil and other organic deposits from heat exchangers and related equipment.
An acidic cleaning powder with a sulphamic acid base and a corrosion inhibitor that is particularly effective for removing calcium carbonate and other inorganic scale.
An alkaline powder that is specifically designed for the neutralization of used RIG WASH powder prior to disposal.
Disclean removes the heavy tenacious deposits which collect in fuel and lube oil centrifugal separators and can be use as Rust Removing chemicals as well as for Passivating of spare parts.
