Product Dose
- 7988773 reads
Refer to technical datasheet. and the Material Safety Data Sheet before use. Always refer to any warning, instructions and labels supplied with the products.
Methods-of-Application-and-Dose Rates :-
1.Injection method for tank washing machines.Dose rate 1-10 Ltrs.per ton wash water 0.11%
2.Circulation method. Dose rate 1-10 litres per ton wash water (0.1-1%).
3.Direct Spot cleaning.Handspray concentrate or diluted with up to 5 parts water & leave for several minutes
before rinsing off with clean water.
For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
Procedure-of-Use:
General-Cleaning:- RXSOL-20-3002-025 is not suitable for use with Aluminum, Magnesium and Zinc Silicate coatings can be used for all types of cleaning & degreasing & may be applied by brush, hand spray, high & low pressure washing machines etc.
Tank Cleaning : For removal of residues of Minerals,Animals,Vegetable or Fish oil, Waxes & Soot from systems.
For Cargo Tanks to Remove Soot from Systems :-
1.Spray RXSOL-20-3002-025 on with a high pressure cleaning machine and use1:6 with water.If used with hand sprayer,spray the product concentrate onto the surface,allowing 1 lit. for every 10-12 m2.Use a 5-8% solution in a tank washing machine.
2.Leave for about 30-60 minutes. The surface should be kept wet.
3.Wash down with hot water (80°C) and check the cargo tank.
4.Repeat the procedure if necessary.
All chemical products should be handled with care. Protective clothing and respiratory equipment should be used where necessary.
