Product Dose
- 7945014 reads
Depending upon the deposition either concentrated or diluted .If used diluted use 1 part concentrate to 2-10 parts of water to yield a very effective end product. The components and machine parts are then dipped into the solvent / solution for 30 min. to 1 hr. Heavy deposition may need 12-24 hours , parts must be taken out from the bath and washed thoroughly with a high- pressure water supply jet system.
concentrated RXSOL-16-1003-025 is most effective product in its category due to its quick and complete action. can be applied for cleaning of highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder heads, injectors, tubes, oil filters , old paint and lacquers )
For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.
SAFETY AND HANDLING:- Completely Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
carbon remover can dilute with water to makes it economical
carbon remover msds available on request
Its formulation makes it to use as a hard carbon remover
Also very effective to use as a baked carbon remover
carbon deposit remover is very effective to clean diesel engine parts, without scrubbing and harrashing original surface. due to its uniqunness kept this materials in best carbon removal agent
carbon deposit cleaner loosen hard deposit by emulsifying and pentrating formula.
carbon remover solvent is water missicible in nature.
Non- evaporation prevents loss of chemical. Highly concentrate carbon cleaning product manufacturer and supplier for Marine Shippinga and heavy Industries. We are one of popular supplier of Carbon Remover in Visakhapatnam - vizag, Gnagavaram, Chennai, Mumbai, GOA, Manglore, Goa, Kandla, Mundra, Sikka, Kolkata, Haldia, Pirpav, Dubai, Sharjah, Fujairah.
CHARACTERISTICS :-
- Unique chemical formulation with corroision inhibitor
- Non- toxic
- Extends time between cleans.
- Effective removal of STICKER/CARBON DEPOSITS , completely heavy carbon, grease oil, varnish and other deposits as well as old paints, resins and lacquer coatings
- Can be applied by all normal methods.
- Formulated to be very cost effective.
- Does not contain chlorinated hydrocarbons.
- Can be used on all metals & most painted surfaces.
- 100% Active.
- Dries Completely.
- Does not require special feeding equipment for safe application.
- Reduce downtime and maintenance costs.
