Product Application
- 8060888 reads
General cleaning: Aqua Wash Cleaner can be diluted to a 2% solution in water for light cleaning. It must be allowed to soak for 1-15 minutes before rinsing with a waterjet. The effectiveness of the product is increased by using water at a temperature of 20 up to 60°C for dilution and rinsing.
Spot Cleaning. Hand sprayed neat or diluted up to 1 – 5 parts water and left for about 20 – 30 minutes before washing off with water
For removal of final coal dust residues, spray on neat, leave for 10 – 20 minutes and then pressure wash with fresh or sea water.
Ultrasonic tank cleaning. 50ml : 50 ltrs water (increase as required).
Spraying Method : It may be used neat or diluted by up to 50 parts of water, according to the amount and type soil to be removed For contamination, Aqua Wash Cleaner is sprayed on undiluted and left for 20 - 60 minutes. It must then be hosed off with a powerful waterjet, whilst brushing the surfaces.
Direct injection Recirculation method : Dose rate: 0.5 – 5 litres per tonne wash water (0.05 – 0.5%) through tank washing machines
Due to its powerful detergency effect, Aqua wash immediately start a chemical dissolving reaction to dissolve and removes oil, fat and grease. Its formulation is developed to solve many cleaning problems to use as multi cleaning action as an all-purpose degreasing and cleaner in the engine room, on deck, Also is used as a tank cleaner.
Aquawash classified as liquid detergent having strong formulation with anionic and non-ionic surfactants and proprietory emulsifying agents to result good foaming action.
