Product Application
- 8072874 reads
PROEDURE OF USE :
| 1st Method ( SPRAY METHOD ) | Mix 1 part of RXSOL-10-1089-020 with 2 -10 parts of water / GAS-OIL ( For heavy oil,greasy surfaces use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minted of spray theRXSOL-10-1089-020 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud start vanishing with cleaning media and water. |
| 2nd Method (IMMERSION PROCESS ) | Application in immersion process with or without ultrasonic support, manual wiping. |
| 3rd Method (RE-CIRCULATION METHOD ) | RXSOL-10-1089-020 is also used in conjunction with alkaline degreasing bath at 2-10% (v/v) concentration for better and quick degreasing action. Either the bath is heated to be 70°Cor the solution can be stirred or air agitated. FINALLY, RINSE THE SYSTEM WITH FRESH WATER. |
Cold wash can be utilized for Complete removal of dirt, oil, carbonized grease, heavy oil, gum, vegetable oil, Lube oil, soot, asphalt, paraffin, carbon stains etc. Gives clear finish to the surface. Highly effective for the removal of crude and other high melting point stains.
Advantages :
RXSOL-10-1089-020 is easily soluble in water Action is quite fast even at the low temperature which gives advantages of cleaning under operation And avoid shut down and downtime. Non corrosive to most of the metals / plastics. Gives clear finish to the surface .Lower cost due to high concentration
Fields of Application :
Treated for the really tough daily cleaning problems faced in the proper Maintenance of Industrial and Institutional physical plants. Can be used as a stripper for all types of waxes and finishes and as a Degreaser where regular cleaners will not perform. May be brushed on , sprayed or used in a dip tank . Excellent for use as a wash for fuel tankers & as a liquid steam jenny compound.
