Product Application
- 8088313 reads
RXSOL-67-6704-210 dosage should be determined according to the job specific requirements. Dosage rate will vary depending on the temperature, type of
cement, percentage of supplementary cementitious material, fineness of sand and water content. RXSOL recommends that trial mixes are performed in order to establish the required dosage and a regular process control tests should be conducted in order to adjust the admixture dosage.
In general practice Normally dispensed at a rate of 0.7-1.5 Liters per 100kg of cement
It may also be added separately to freshly mixed concrete
It should be preferably added directly to water prior mixing to the wet aggregate
However, actual site trials should be conducted for finding exact dosages
(An indicative example: With control slump of 50 mm collapsible slum can be achieved for 15-30 min, 1 hr/170mm, 2 hr/150 mm &3hr120 mm depending on temperature & humidity condition with admixture dosage of 0.7% of the wt. of cement). Dosage may be increased or decreased depending upon slump required, humidity conditions, temperature & mix design. The above example is just for indication
Note: Example not rephrased.
NOTE :::--- RXSOL-67-6704-210 can be added to the concrete mix near the end of mixing cycle in the concrete mixer and it can be also added on job-site by mixing at a higher speed and more revolutions in the truck.
Superplasticizer RXSOL-67-6704-210 is utilized to provide high workability to cement or aggregate mix without adding extra water. It assists in improving retention of high workability without excessive retardation of set. It is suitable to use in high temperature & can be easily transported for long distances.
RXSOL-67-6704-210 can be used in all type of ready-mix and precast concrete where durable concrete with low water-cement ratio, high strength and low permeability is specified and in applications where high slump flowable concrete is required.
It provides good cohesive pump able mix at low W/C ratio & moderate cement contents
Imparts extreme fluidity to the concrete, which facilitates rapid placement of concrete
Helps in controlled & predictable retardation of setting with improved slump retention
Useful in production of self compacting concrete
Provides high and extended slump
Improves workability and plasticity
Reduces water requirement,increases strength and produce durable and dense concrete
Improves pumping and finishing characteristics
Reduces segregation
Applied in complicated formwork or with congested reinforcement
Achieves good compaction without any excessive vibration
Reduced permeability, segregation and bleeding
helps in increasing compressive and flexural strength
It is chloride – free