Product Application
- 8020476 reads
Chemical Tank Cleaning
Spraying –
The tank should be sprayed with BSOLV, and then left for 45 minutes. After 45 minutes the tank should be butterworthed warm 50-60 o C for 30 minutes, followed by a 4 hour hot wash 80 – 85 o C, after which fresh water rinse and dry the tank. All safety precautions must be taken whenever handling this product.
Re-circulation –
Sufficient BSOLV should be filled into the tank so that the cargo pump and butterworth machines function properly. Circulations should be carried out for at least 4 and ideally 6 hours and all areas of the tanks must be rinsed. The tank MUST be at least cleaned to a good Water White standard and must be dry, before filling the BSOLV. If another tank is to be circulated, then the product can be directly transferred. IF not, it can be returned to drums for further use at a later date. Following the circulations, the same washing procedure is carried out as outlined above in the spraying section.
* Use a strainer at the pumpstack when circulating any solution.Tank Lining – Stainless / Zinc / Epoxy
- Active solvent for solvent-based coatings.
- Coalescent for industrial water-based coatings.
- Coupling agent for architectural water-borne coatings.
-
Coupling agent and solvent in household and industrial cleaners, rust removers, hard
surface cleaners, and disinfectants. - Primary solvent in solvent-based silk screen printing inks.
- Coupling agent for resins and dyes in water-based printing inks.
- Solvent for agricultural pesticides.
-
Very Effective and multi Tank Cleaning
Features ::: Due to its equal balance of hydrophobic and hydrophilic characteristic , this product is highly suiable for industrial cleaners, rust removers, hard surface cleaners, and also can be used as disinfectants. Popula and very versatile cleaning product.
- Powerful solvency
- Coupling ability
- Coalescing ability
- Moderate evaporation rate
- High dilution ratio
- Wide range of applications
