Product Application
- 8048641 reads
It must be applied concentrated . May be applied to the surface by brush or spray, agitate stubborn deposits if required with a brush and wipe away residues with clean cloth.
RXSOL-16-1009-020 can also be use in dip tank applications.
Heavily soiled components may require agitation with a brush.
RXSOL-16-1009-020 preferably use in open or sufficiently ventilated areas. RXSOL-16-1009-020should always be used concentrate (without mixing with other solvent.)
For best results apply with either by brush, swab,or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1009-020. Never use RXSOL-16-1009-020 on a running generator or motor. RXSOL-16-1009-020 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic. Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
For optimum performance in ultrasonic cleaning systems a frequency of 25 kHz is recommended. Due to the self-heating ability of such systems a temperature control should be installed on the machine to ensure operating temperature remains below 40°C. Whilst components may be allowed to air dry naturally drying times can be reduced by wiping away excess material with a cloth or by employing forced air drying techniques.
- High dissolving and penetration action with minimum residual effect.
- Excellent degreasing power .Removal of oils, greases, machining fluids, hydraulic fluids, and hydrocarbon-based protective coatings in manufacturing processes.
- Safe on applied electrical insulation.
- Non-corrosive .It is safe to use on painted or varnished metal surfaces also Excellent compatibility with metals and most plastics.
- Without chlorinated solvents.
- Suitable for De-watering following aqueous processing. Application RXSOL-16-1009-020 to wet surfaces will replace unwanted water from components and electrical systems.
- To be used as an alternative to conventional electric cleaners Cleaning electrical and electronic equipment.
- Low odour and controlled evaporation reduce exposure in the workplace.
- Suitable for use in ultrasonic cleaning systems.
- Degreasing of machinery, components and assemblies during maintenance and repair.
- Final cleaning prior to welding, painting, bonding or coating.
CLASSIFICATION :
*ELECTROSOL QD (quick dry )
*ELECTROSOL NF (Non-flammable )
*ELECTROSOL PLUS APPLICATION : For cleaning of electrical parts .