Product Application
- 8020567 reads
Typical dose rate: 100 - 500 ppm (0.1 - 0.5 litre/m3 of water)
In a multistage bilge water cleaning system, RXSOL-10-1002-020 is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it. The feed is adjusted in connection with the installation It is highly recommended for heavy duty degreasing action , Depending on contamination 5-25% with fresh water.
RXSOL-10-1002-020 is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Bilge Water Flocculant breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering. It is highly recommended for heavy duty degreasing action .
