|
Engine Water Treatment contains a balanced mixture of corrosion inhibitors in liquid form, together with an antiscalant. It is formulated to protect systems containing aluminium components.
Features
- Protects all metals (including aluminium) in engine cooling systems from corrosion attack
- Does not affect gaskets or hoses
- Compatible with antifreeze solutions
Benefits
- Keeps systems free from sludge and scale deposits
- RXNitrite based closed circuit inhibitor 1000ppm at 1.00%.SOL liquid evvt is a high performance nitrite based closed circuit inhibitor with indicator. Nitrite > 1000ppm at 1.00%.
- lt is much-functional corrosion inhibitor for protecting recalculating cooling and heating water systems.
- RXSOL Liquid EWT treatment is an excellent treatment for diesel engine primary and secondary cooling water.
- It is also ideally suited for use in chilled water systems because it forms a clear, nonstaining solution, which protects the system from corrosion and hard water scale.
Active Matter: 75-80
Packaging: 25.00 Ltr.
Application:
- RXSOL Liquid EWT is very useful for Maintaining Nitrate In MIE,A/E & Compressor Fresh Water Cooling System.
- RXSOL Liquid EWT treatment is an effective corrosion inhibitor for ferrous metals in marine circulating cooling water systems.
- Because certain aluminum alloys are highly anodize, they may be difficult to completely protect.
- Therefore, the use of RXSOL liquid EWT treatment with systems containing aluminum alloys should be discussed with a local Rx Marine Marine representative prior to starting treatment.
- In order to ensure the maximum benefits from a RXSOL Liquid EWT treatment program, the system should be inspected for deposits and corrosion.
- If the system is found to be contaminated, it must be chemically cleaned before the treatment program begins.
Dose:
- The system should be filled with good quality fresh or distilled water and where freeze protection is necessary, the proper amount of glycol-based antifreeze should be added. Begin circulating the system water, and add RXSOL Liquid EWT cooling water treatment at an initial dosage of 8 liters per ton of system water capacity. Circulate for 30 minutes after addition to ensure good distribution and the establishment of a protective film.
Tech Spec
Video Clips
|