Features:
- Prevents «Red Water» in potable water systems.
- Provides scale and corrosion control in hot water heaters, coolers and watertanks. tanks.
- Controls corrosion in pipelines and other equipment handling softened or evaporated water.
- Effective at temperatures up to 60°C (140°F).
- Increases system life and reduces maintenance costs.
- No restrictions on use of the treated water as feed water to boilers or engine cooling systems.
Approval :
Approved by Norwegian National Institute of Public Health asan additive to drinking water.
Approved by NSF according to Standard 60.
|
Dosing method:
Potable Water Stabilizer should be dosed to a suitable point in the system. If the expansion tank is used, adequate circulation must be assured.
Dosage and control: Make a 5% solution in fresh water by adding the powder slowly to the water while stirring. The solution should preferably ne portioned to maintain desired dosage, either by means of a simple bypass feeder, or with RXSOL Dosage System for Water Treatment. The product can be injected into the discharge line of the fresh water generator or directly into the fresh water pumps’ suction manifold. If a high percentage of shore water is used the solution must be “slug” dosed into the tanks prior to taking water. Inject a 5% solution at a rate of 0.12 liters per m3 of water to obtain a 6 mg/Ltr concentration.
|
Directions for use:
Potable Water Stabilizer effectively and economically provides scale and corrosion control in potable water systems and other shipboard once-through water systems. Dosage varies between 4 – 8 mg/Ltr for ordinary water treatment. For drinking water, dosage should always be kept at or below 9 mg/Ltr (9 g/ton).The powder product should not be dosed directly into the water system. A water solution should be made prior to dosing.
Tech Spec
|